Shop for 100 amp 120 volt 240 volt single phase nema smart

Generac Automatic Transfer Switches are designed for use with single phase generators that utilize an Evolution or Nexus Controller. The 100 Amp open transition switch is available in single phase with a service equipment rated configurations. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.

Generac 3 Phase Automatic Transfer Switches are designed for use with 3 phase generators that utilize an Evolution or Nexus Controller. Service rated (RTSW) switches are housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied powder coating. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands.

Generac Automatic Transfer Switches are designed for use with single phase generators that utilize an Evolution or Nexus Controller. The 100 Amp open transition switch is available in single phase in both service equipment rated and non-service equipment rated configurations. Service rated (RXSW) Generac automatic transfer switches are housed in an aluminum NEMA/UL type 3R enclosure, with electrostatically applied and baked powder paint.

Generac 600 Amp non-service rated switches are compatible with the full 22-150 kW line of liquid cooled generators. The switches are open transition and are available in 120/240 single phase. When used in tandem with Smart Management Modules, up to 8 more loads can be managed as well, providing the most installation efficient power management options available.

Generac Automatic Transfer Switches are designed for use with single phase generators that utilize an Evolution or Nexus Controller. The 150-Amp open transition switch is available in single phase with service equipment rated configurations. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.

Generac Automatic Transfer Switches are designed for use with single phase generators that utilize an Evolution or Nexus Controller. The 200 Amp open transition switch is available in single phase with a service equipment rated configurations. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.

Generac Automatic Transfer Switches are designed for use with single phase generators that utilize an Evolution or Nexus Controller. The 400 Amp open transition switch is available in single phase with a service equipment rated configurations. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.

The Westinghouse WATS200 Automatic Transfer Switch gives homeowners a smarter path to automatic backup power for about half the cost of traditional permanent standby systems by reducing equipment, site prep and installation costs. Instead of a manual portable generator setup or a high-cost traditional home standby generator, the WATS200 is an efficient new way to get automatic standby home backup using a compatible Westinghouse Smart Switch Ready generator. This 200 amp transfer switch communicates with both your generator and your utility power to keep your home ready for an outage. It automatically starts your generator and transfers power to your home outlets. When utility power returns, it automatically switches back and shuts the generator down. It also keeps your generator's battery charged, so it's always ready to power up automatically. The WATS200 offers serious home backup generator capability with service entrance rated design, a NEMA 3R indoor/outdoor enclosure, ETL listing under UL1008 and integrated A/C load management. Many Westinghouse generators already have a smart switch outlet and are ready to upgrade to automatic standby. Tri fuel generators can run on natural gas, so with an added hookup on your home supply line, you can eliminate refueling. For maximum home standby power, the WGen20000TFc generator has a terminal block for a hardwired connection to the ATS, so full power output can be used. Comes with a 5 year limited warranty.

The newest addition to the Husky line of products - the Husky Pioneercut 20P Plasma Cutter. The Husky Plasma Cutter is a must-have for metalwork. The Husky Single Phase Plasma cutter offers 20 AMP, 120 Volt cutting action. The output of the Husky Plasma cutter is 10 - 20 A and the duty cycle of the Husky Plasma Cutter is: 60%@16A and 35%@20A. The Husky Plasma cutter offers Excellent cutting performance with a Quality cutting thickness of 1/4 in. and a Maximum cutting thickness of 5/16 in. The new Husky plasma cutter also features a durable and robust handle, making it extremely portable and suited for on-the-go use. The Husky Single Phase Plasma Cutter also features a power indicator to indicate when the machine is powered on, and an infinite knob to control cutting amperage easily. The Husky Plasma Cutter is the perfect addition to your Husky Tool collection and is a must-have for metalwork.

Another new addition to the Husky line of products - the Husky Single Phase 225 Amp 240-Volt/120-Volt Dual Voltage AC Stick Welder with Dual Voltage Technology. This Husky welder is a must have for all your welding needs. The Husky Single Phase AC Stick Welder includes dual voltage technology and has varying outputs: 10-70A (120V); 15-225A (240V). Duty cycle: 40%@70A (120V); 20%@225A (240V). This Husky Welder comes ready to go and is great for DIY welders or at home welders. This Husky Welder also includes safety features such as tripped overheat protection, short circuit alert, and tripped overvoltage protection. Husky Stick 225 Welder is the perfect addition to your Husky Tool collection.