Shop for 10ft 120v electric starter cord for select snow

Durable 10-ft 120-Volt electric start power cord for Ariens snow blowers. It's a weather-resistant, user-friendly 3-prong plug. CSA and UL listed for dependable winter use.

Give power to your Gavita LED fixture by using the Gavita Power Cord. This cord is an essential part to Gavita indoor grow light systems. It has a voltage of 120, measures 8 ft. L, and is required to operate your fixture (sold separately). The Gavita Power Cord is compatible with Gavita 900e, 1700e, CT1930e and Sun System RS1850 LED fixtures.

Pull power from three different sources with the WEN 13,000-Watt Tri-Fuel Inverter Generator. Simply select your preferred method - gasoline, propane, or natural gas. Generate 13000 surge and 10500 running watts on gasoline, 11250 surge and 9000 running watts on LPG, and 10000 surge and 8000 running watts on NG. Electric start powers up the generator with the press of a switch with a recoil starter as backup. CO Watchdog protects your family by automatically turning off the generator if dangerous levels of carbon monoxide are detected. Our 550cc engine operates at 64 decibels at quarter load. Fuel shutoff stops the flow of fuel before automatically shutting the unit down. This fights blockages caused by stagnant fuel inside of the carburetor. This generator limits total harmonic distortion to under 0.3 percent at no load and under 1.2 percent at full load, making it safe to run laptops, cellphones, monitors, tablets and other sensitive electronics. The panel comes equipped with one 120V/240V NEMA 14-50R receptacle, two three-prong 120V NEMA 5-20R receptacles, one 120V NEMA 10-50R receptacle, one 120V NEMA L5-30R receptacle, one 12V DC receptacle, a voltage selector switch, and two 5V USB ports, as well as side-mounted lights for better visibility in low-light conditions. The bonded-neutral 240V output supports Level 2 EV charging for off-grid peace of mind. NG hose sold separately (part no. TF1450X-1431). Backed by a three-year warranty.

This lighting solution combines high output with energy efficiency to illuminate large workspaces such as garages and construction areas. Each unit delivers up to 8,000 lumens while drawing about 50 watts, offering bright, consistent illumination and a meaningful reduction in energy use compared with traditional halogen equivalents. The housing is built to withstand challenging conditions, featuring an IP65 rating that protects against water intrusion and dust, supporting reliable operation in rain, snow, and dusty environments. The design emphasizes durability for tough job sites, including weathered exteriors and muddy floors. A 10 ft. heavy-duty 18 AWG cord with a standard US plug extends flexibility in placement and minimizes strain on the power source thanks to thicker internal wiring that helps prevent overheating. Lighting control is precise, with 180-degree adjustable brackets and 5,000K daylight LEDs that deliver glare-free, true-color visibility for detail-oriented tasks like auto repair or woodworking. The package includes two units, expanding coverage to a 360-degree layout or enabling distribution across multiple locations for different projects. Overall, this setup supports versatile use in garages, workshops, and similar spaces by delivering reliable illumination and adaptable placement. Color: Orange. Material: Aluminum.

ETi Linking Cord Connector turns your 5ft. linking cord into 10ft. of distance between your lights. Use with ETi 5ft. Linking cord #314899153 to connect with compatible Commercial Electric and ETi LED linkable shop lights, strip lights, undercabinet lights. See full list of compatible fixtures listed below.

Wayne 31006-WYN2 replacement 10ft. power cord for 10 ft. power cord for the following models: RWCS50T, WWB, SEL50, and TSC130. Easily replace the power cord on your Wayne model with this certified replacement part. This replacement part carries a 90 day warranty.

Dutton-Lainson's 25505 StrongArm SA-Series 120V AC electric winch is used for horizontal pulling applications only. This 120V AC operation comes complete with a 10 ft., 3-wire grounded power cord and a built-in 3-position rocker switch. This electric winch features a 1,200 lb. load capacity. Other features include: "power in", "power out", controlled freewheeling clutch, 50 ft. of 7/32 in. galvanized aircraft cable, an automatic mechanical friction brake and an emergency crank handle in case of power loss. The clutch lever allows for smooth load control and easy cable removal. The winch is powered through a standard wall outlet using the installed power cord (10', 3-wire grounded) and built-in 3-position rocker switch. Electric switch and clutch controls are conveniently located on the same side for easy operation. Note: This winch is built for horizontal pulling applications. For vertical lifting applications, order a winch with no clutch lever installed (price is the same). This winch has a maximum run time of 3 minutes. See owner's manual for more details. All D-L StrongArm electric winches are built for multipurpose hauling and pulling operations. They are not to be used as hoists for lifting, supporting, or transporting people, or for handling loads over areas where people could be present.

This universal starter handle fits most two-stage snow blowers. Starter handles cord measures 44 in. long enough for easy measurement and an exact fit. The larger handle is accommodating for winter gloves and mittens.

This universal starter handle will fit most 2-stage snow blowers. Starter handles cord measures long enough for easy measurement and an exact fit. The kit provides everything you need to replace the part.

Use the Powercare Starter Handle and Cord to replace the throttle cable on your walk-behind lawn mower, snow blower or other outdoor power equipment. The cord is designed for use with recoil starters. Comes with 88 in. of rope and a replacement handle.