Shop for 3 channel cable protector

Elasco cable ramps are constructed with a solid cast polyurethane base and lid that are connected by a reinforced fiberglass rod that won't rust or corrode. Our products hold up against natural and man-made elements and are compliant with safety requirements. With easy transportation and simple installation, our products can be configured to meet your needs. Backed by a lifetime warranty and offering premium material characteristics. We provide a basic solution to a basic problem. Whether it be pedestrian or vehicle traffic we help maneuver from 1 side of cables to the other side while keeping your cables absolutely safe. No matter the weight of your cargo, we will help you get to your destination in a safe and efficient manner. Glow Disclaimer: Glow is measured in milli-candela's. The human eye, when dark adapted which takes most humans between 15-minutes to 45-minutes, can see in the dark 3.7 milli-candela's. Under the correct circumstances of pure darkness, our glow material can be seen up to 40-hours when the human eye has been dark adapted. Ideally, when viewing the glow material, your eyes should be dark adapted which means one has not been in the Sun or other light source - this will keep one's eyes from adapting between dark and light. If your eyes adjust from light to dark or there is light pollution present, the material will not look as enhances until one's eyes re-adapt. Material: Plastic.

Electrical cables exposed to vehicle and pedestrian traffic are vulnerable to serious damage, leading to costly repairs, unexpected downtime, and safety risks. Loose cables not only create trip hazards but can also pose dangerous shock threats on the jobsite. ShockShield Cable Protection Systems offer a reliable solution to safeguard temporary cable runs in high-traffic areas. With a modular design that adapts to any environment, ShockShield makes it easy to connect multiple units for customized protection. Reduce liability, eliminate downtime, and protect your investment with the trusted durability of ShockShield. Material: Plastic.

Cable Man Cord and Cable Protectors provide the ultimate organization, safety and protection of wires and cords for both indoor and outdoor areas around your home and office. Use in high foot traffic areas to help reduce trip hazards or anywhere that exposed electrical and extension cords, computer and electronics wires, coaxial cables and others need organized and protected from damage. Unlike other floor cord protectors, Cable Man Cord and Cable Protectors are engineered to easily uncoil and lay flat in minutes with specially formulated recycled vinyl materials that offer premium durability. Able to withstand frequent foot traffic, vacuums, carts and other light-duty equipment that easily roll over the smooth tapered D-shape, the residential and office cord runner can accommodate multiple cords in each of the 3 channels. Cable Man is designed with lengthwise ribs on top to improve traction and on the flat underside to reduce movement. To insert wires or cables, use a utility knife to cut the built-in channel guides on the under-side of the protector to open the cavities and feed cords into the channel. Always take proper safety precautions when using utility knives and sharp tools. This cord protector can accommodate cords and wires up to 3/8 inch thick. Material: Plastic.

Cable Man Cord and Cable Protectors provide the ultimate organization, safety and protection of wires and cords for both indoor and outdoor areas around your home and office. Use in high foot traffic areas to help reduce trip hazards or anywhere that exposed electrical and extension cords, computer and electronics wires, coaxial cables and others need organized and protected from damage. Unlike other floor cord protectors, Cable Man Cord and Cable Protectors are engineered to easily uncoil and lay flat in minutes with specially formulated recycled vinyl materials that offer premium durability. Able to withstand frequent foot traffic, vacuums, carts and other light-duty equipment that easily roll over the smooth tapered D-shape, the residential and office cord runner can accommodate multiple cords in each of the 3 channels. Cable Man is designed with lengthwise ribs on top to improve traction and on the flat underside to reduce movement. To insert wires or cables, use a utility knife to cut the built-in channel guides on the under-side of the protector to open the cavities and feed cords into the channel. Always take proper safety precautions when using utility knives and sharp tools. This cord protector can accommodate cords and wires up to 3/8 in. thick. Material: Plastic.

Keep cords and hoses organized and protected in busy areas with this 2-channel cable protector ramp set. Each ramp measures 37.01 in L x 9.84 in W x 1.69 in H and includes two channels sized 1.2 in W x 1.1 in H to route cables side by side and reduce tangling. Made with TPU and TPR materials, the ramp is designed for indoor and outdoor use and features a flip-open top cover for quicker cable placement and easier access during changes. The textured surface helps improve traction for foot and wheeled traffic, and the black and yellow design increases visibility. Rated up to 22000 lb per axle, this 3-pack is suitable for garages, schools, offices, warehouses, and event setups where vehicles, carts, and pedestrians may cross cable runs. Material: Rubber.

This 2-channel cable protector ramp helps organize and shield cords, cables, and hoses in high-traffic areas while improving crossing safety for pedestrians and vehicles. The ramp measures 36.14 in. L x 9.84 in. D x 1.69 in. H with two built-in channels to keep lines separated, and the flip-open top cover speeds up cable loading and removal during setup changes. Built with TPU and TPR construction and designed for heavy-duty use, it supports up to 22,000 lbs per axle and is suitable for indoor or outdoor environments such as warehouses, parking areas, events, and job sites. Material: Plastic.

Mighty Guard Collection: Elasco Heavy Duty 1-Channel Cable Guard offering 2 in. in channel width. This Heavy Duty collection offers 2 and 3 size channels. Products are available in multiple channel options including turns and end caps. The MightyGuard collection focuses on protecting larger size cables and hoses from heavy duty vehicle traffic. Elasco Cable Guards are constructed with a solid cast polyurethane base and lid that are connected by a reinforced fiberglass rod that won't rust or corrode. Our products hold up against natural and man-made elements and are compliant with safety requirements. With easy transportation and simple installation, our products can be configured to meet your needs. Backed by a lifetime warranty and offering premium material characteristics. We provide a basic solution to a basic problem. Whether it be pedestrian or vehicle traffic we help maneuver from one side of cables to the other side while keeping your cables absolutely safe. No matter the weight of your cargo, we will help you get to your destination in a safe and efficient manner. Material: Plastic.

The Guardian 3-Channel Cable and Hose Protector Ramp is instant drop-over cable, wire, and hose protection for the shop, warehouse and more. It features 3 channels, each measuring 1.375 in. x 1.375 in. for protecting lines from vehicle traffic. The modular design allows multiple ramps to be connected together in series. Maximum 4,000 lb. capacity per axle (2,000 lbs. per tire), made with heavy-duty commercial grade rubber.

Electrical cables exposed to vehicle and pedestrian traffic are vulnerable to serious damage, leading to costly repairs, unexpected downtime, and safety risks. Loose cables not only create trip hazards but can also pose dangerous shock threats on the jobsite. ShockShield Cable Protection Systems offer a reliable solution to safeguard temporary cable runs in high-traffic areas. With a modular design that adapts to any environment, ShockShield makes it easy to connect multiple units for customized protection. Reduce liability, eliminate downtime, and protect your investment with the trusted durability of ShockShield. Material: Plastic.

Job sites and facilities need power everywhere, and extension cords are often a quick fix. Be ready to manage cables during temporary projects with Wiremold Outdoor Cord Cover and Cable Protectors. Designed to integrate with portable power distribution units, these outdoor cord cover housing units are key to a safe electrical system. Simply mix and match to build yours. Keep things out of the way and organized in a rugged, all-weather design built for heavy-duty cables. Material: Plastic.