Shop for 5mm cutter for rail and stile router

The Yonico 3 bit mitered door Router bit set will make dramatic mitered doors as an alternative to rail and stile routing. The large profile router bit will create beautiful door frames as well as picture frames, mirror frames, chair rails, crown moldings and other decorative trim. For mitered door frames and picture and mirror frames the stock is mitered at 45 and glued and biscuit joined with the included large diameter, 5/32 in. H cutter. This method will create a sturdy and secure joint. The profile bit is designed to work with 2-13/16 in. W stock and a recommended thickness of at least 3/4 in. Combine with any 1 of our Yonico raised panel router bits to create highly decorative raised panel doors. Use the included 1/4 in. slot cutter router bit to cut the slot for the panel. As with our other Yonico router bits, the Yonico mitered door router bit set is manufactured with industrial quality C3 micro grain carbide. 2-flute carbide cutters and 1/2 in. shanks. Create exquisite center panel door frame with the mitered door router bit. Mitered doors allow much more leeway for artistic design than traditional rail and stile doors. The rail and stile door's joint restricts the amount of profile design that you can cut into the frame, but with miter joint your options are limitless.

Yonico rail and stile Router bit set (12243q) will cut rail and stile for cabinet doors in the classic ogee design. Fully enclosed ball bearing guides allow for precise rail and stile cuts without the use of a fence. Yonico rail and stile router bits produce impressive and perfect results with every cut yielding years of woodworking satisfaction. 2-flute carbide cutters and 1/4 in. shanks. Rail and stile door construction has been around for centuries and is the most common way to build doors for cabinets and furniture. Our rail and stile router bits will enable you to create your own frames for frame-and-panel doors. Cope the ends of your rails with 1 bit, and then switch to the second bit to route the inside edge profile in all your door parts. Now the center panel can be inserted and the door can be assembled.

Yonico rail and stile Router bit set (12238q) will cut rail and stile for cabinet doors in a classic round over design. Fully enclosed ball bearing guides allow for precise rail and stile cuts without the use of a fence. 2-flute carbide cutters and 1/4 in. shanks. Yonico rail and stile router bits produce impressive and perfect results with every cut yielding years of woodworking satisfaction. Rail and stile door construction has been around for centuries and is the most common way to build doors for cabinets and furniture. Our rail and stile router bits will enable you to create your own frames for frame-and-panel doors. Cope the ends of your rails with 1 bit and then switch to the second bit to route the inside edge profile in all your door parts. Now the center panel can be inserted and the door can be assembled.

This raised panel back cutter router bit has a cutting height of 7/16 in. and a cutting depth of 5/8 in. with an overall length of 2-1/2 in. and a 1/2 in. shank. Reduce the rail and stile door's center panel thickness allowing it to fit properly in any standard or non-standard door frame groove. A dedicated back cutter router bit gives you the flexibility to size the edge of the panel to your custom specs.

The Yonico 12339q Door Construction Router Bit Set includes 1/4 in. round over rail and stile bits and a 1/4 in. cove panel raiser. For use with up to 1 in. stock. Router Bit Measurements: Rail and Stile 1-3/4 in. Dia, 1 in. cutter height, 2-7/8 in. overall height, 3/8 in. D of cut, 7/8 in. bearing diameter Panel Raiser 2-1/2 in. Dia, 1/2 in. cutter height, 2-7/16 in. overall height, 1 in. D of cut, 1/2 in. bearing diameter Rail and stile bits create a perfectly matched rail and stile door frame. The cove raised panel router bit cuts a stylish edge on the central panel of your door. Ball bearing guides allow you to make precise cuts without the use of a fence. The Yonico 12339q router bit set comes in a solid wood storage case. Bit shanks are 1/4 in. Rail and stile door construction has been around for centuries and is the most common way to build doors for cabinets and furniture. Our rail and stile router bits will enable you to create your own frame-and-panel doors. Cope the ends of your rails with 1 bit, and then switch to the second bit to route the inside edge profile in all your door parts. The included panel raiser cuts the artistic profile on the center panel which reduces the panel's thickness to properly fit in the door frame's groove.

Make professional, bevel raised panel cabinet doors. Set includes bevel rail and stile bits and a bevel design panel raiser with a back cutter. For use with up to 7/8 in. stock. Router Bit Dimensions: Rail and Stile 1-5/8 in. Dia, 7/8 in. Cutter Height, 2-3/4 in. Overall Height, 3/8 in. Cutting Depth Panel Raiser 3-1/8 in. Dia, 1/2 in. Cutter Height (with/without back cutter), 3 in. Overall Height, 1-1/4 in. Cutter Depth Rail and stile bits create a perfectly matched rail and stile door frame. The raised panel bit will add a bevel edge to the central panel of your door. The panel raiser bit can also be used to make attractive drawer fronts, table tops, plaques and moldings. Fully enclosed ball bearing guides allow for precise cuts without the use of a fence. 2-flute carbide cutters and 1/2 in. shanks. Set comes in a solid wood storage case. Rail and stile door construction has been around for centuries and is the most common way to build doors for cabinets and furniture. Our rail and stile router bits will enable you to create your own frame-and-panel doors. Cope the ends of your rails with 1 bit, and then switch to the second bit to route the inside edge profile in all your door parts. The included panel raiser cuts the artistic profile on the center panel which reduces the panel's thickness to properly fit in the door frame's groove.

This 3 bit cabinet door Router bits set includes a set of matched shaker rail and stile bits for stock between 5/8 in. and 7/8 in. thick and a 2-3/4 in. shaker panel raiser with a back cutter for stock up to 1 in. thick. 1/2 in. shanks. Rail and stile door construction has been around for centuries and is the most common way to build doors for cabinets and furniture. Our rail and stile router bits will enable you to create your own frame-and-panel doors. Cope the ends of your rails with 1 bit, and then switch to the second bit to route the inside edge profile in all your door parts. The included panel raiser cuts the artistic profile on the center panel which reduces the panel's thickness to properly fit in the door frame's groove.

The Yonico 12334q Door Construction Router Bit Set includes matched 1/4 in. ogee rail and stile bits and a 1/4 in. vertical ogee panel raiser. Use with up to 1 in. stock. Bit shanks are 1/4 in. Router Bit Measurements: Rail and Stile 1-5/8 in. Dia, 1 in. cutter height, 3 in. overall height, 3/8 in. D of cut, 7/8 in. bearing diameter Vertical Panel Raiser 1-1/8 in. Dia, 1-1/2 in. cutter height, 3 in. overall height, 3/8 in. D of cut, 3/8 in. bearing diameter Rail and stile bits create a perfectly matched rail and stile door frame. The ogee vertical raised panel router bit puts a classic edge on the central panel of your door. Ball bearing guides allow you to make precise cuts without the use of a fence. The Yonico 12334q router bit set comes in a solid wood storage case. Rail and stile door construction has been around for centuries and is the most common way to build doors for cabinets and furniture. Our rail and stile router bits will enable you to create your own frame-and-panel doors. Cope the ends of your rails with 1 bit, and then switch to the second bit to route the inside edge profile in all your door parts. The included panel raiser cuts the artistic profile on the center panel which reduces the panel's thickness to properly fit in the door frame's groove.

The Yonico Cove Panel Raiser Router Bit with Back cutter will cut cove raised panels easily while reducing the tongue thickness to 1/4 in. Use with 5/8 in. -1 in. stock. 2-flute carbide cutters and 1/2 in. shank. Back cutter 2 in. Dia x 1/4 in. Cutter Height Front Cutter 3-1/4 in. Dia x 9/16 in. Cutter Height Like our standard raised panel bits, these bits create a beautiful profile for the center panel of rail and stile doors while at the same time, cutting away the back surface of the stock to reduce its thickness even further. Install 1 of these bits in your high-powered table mounted router and route your panels face down. Raised panel router bits have a large diameter and remove a lot of material, so make sure you have a router with enough horsepower to handle this kind of work. All standard raised panel bits are fitted with radial bearings to make adjustment of the router table fence easy. Do not use these bits in handheld routers.

Use the Yonico 14181 Slotting Router Bit for all your slotting needs. Great for cutting slots in a mitered door frame to incorporate door panels. The Yonico 14181 slot cutter cuts 1/4 in. slots. 2-flute carbide cutters and 1/2 in. shank. Slot router bits come in handy for many joinery project. Slotting bits can be used biscuit joinery, cope and stick and to create panel slots in rail and stile cabinet doors.