Shop for barbed elbow 600

The brown 1/2 in. Barbed Drip Fittings are used in the installation of DIG's brown PC drip line and drip tubing with. 570 to. 600 ID. Used by home gardeners and professional alike, the brown fittings are made of high-impact plastic and are available in a variety of configurations. Using a double barb, 2-pieces of drip line or drip tubing may be pushed over the barbed sides of the fittings for a very tight fit. Color: Browns/Tans. Material: ABS Plastic.

This 1 in. barbed x 1 in. male NPT thread hydrant elbow is designed for ground hydrant installations. It connects yard hydrant to flexible plastic pipe. It is easy to install. Material: Brass.

The 17 mm barbed elbow is used for a 90-degree layout connections of 1/2", 5/8" and 17 mm PC drip line and drip tubing. The brown connector elbow is made of high impact plastic and utilizes a double barb. When the drip line or drip tubing is pushed over the barbed side of the fitting, it creates a tight, leak-free connection. Color: Browns/Tans. Material: ABS Plastic.

The 17 mm barbed elbow is used for a 90-degree layout connections of 1/2", 5/8" and 17 mm PC drip line and drip tubing. The brown connector elbow is made of high impact plastic and utilizes a double barb. When the drip line or drip tubing is pushed over the barbed side of the fitting, it creates a tight, leak-free connection. Color: Browns/Tans. Material: ABS Plastic.

The Orbit 1/2 in. Male x Female NPT Swing Joint Elbow is ideal for installing swing joints. Use the elbow in conjunction with a barbed elbow and poly pipe (sold separately) to set sprinkler heads in the vertical position for better spray coverage. Material: Plastic.

The DIG 1/4 in. Barbed Elbow is used to provide a secure connection of two pieces of 1/4 in. micro tubing, soaker hose or drip-line around sharp corners. Use for continuing lengths of micro tubing or to extend a micro tubing from the poly tubing. Each connection offers raised barbed ends to ensure a strong, water tight fit. Color: Blacks. Material: ABS Plastic.

The Orbit 3/4 in. Male Pipe Thread x Female Pipe Thread Swing Joint Elbow is made from polyethylene, making it ideal for installing swing joints. It can be used in conjunction with a barbed elbow and poly pipe to position sprinkler heads in the vertical position. Material: ABS Plastic.

This brass hydrant elbow is designed for ground hydrant installation. The flat surface provides better hydrant stability. Threaded 3/4 in. NPT for installation into hydrant shut-off valve with 1 in. barbed end for coiled plastic pipe.

This brass hydrant elbow is designed for ground hydrant installation. The flat surface provides better hydrant stability. Threaded 3/4 in. NPT for installation into hydrant shut-off valve with 3/4 in. barbed end for coiled plastic pipe.

DIGs low-flow, 360 Fogger/Mister with a 1/4 barbed elbow (also available on a spike) is ideal for misting or watering pots and hanging baskets. Operating at a pressure range of 30 to 60 psi, the 2-GPH fogger/misters vortex design spins the water droplets into a fine mist, producing micro-sized droplets in a small diameter area. The droplet size is very sensitive to pressure; when the operating pressure increases, the droplets become smaller. The Fogger/Mister can be connected into the end of 1/4 micro tubing or directly into poly tubing, or extended using a 1/4 PE riser. It can be placed inside 8 to 24 diameter pots and baskets or used where overhead watering or misting is suggested on any type of planting, including vegetation that requires constant moisture, or for humidifying effect with the mister hung upside down 4-5 above the plant. The Fogger/Mister can also be used for rooting or for creating proper micro-climate conditions. Color: Blacks.