Shop for box blade shank 5pc scarifier ripper adjustable

The MILWAUKEE 5PC Hammer Chisel Bit Set offers Universal Fit with a .401" Round Shank recommended with the M18 FUEL STRIKER Hammer Chisel and is also compatible with pneumatic solutions. Built to provide Long Life made with Durable Steel, this selection of bits completes the most common applications. This 5-piece set includes a round hammer, flat chisel, tapered punch, slotted sheet metal ripper, and spot weld breaker. Each bit has a black oxide coating that will withstand Rust and Corrosion seen in harsh job conditions.

Made for landowners running a tractor box blade or an ATV-mounted ripper, this 16 in. hitch-mounted shank tears through compacted driveway clay, food-plot ground and grown-in trail beds where a chain harrow stops working. The shank measures 16.14 in. (41 cm) of working length and weighs 14.3 lb. (6.5 kg), forged from high-carbon steel and finished with a spray paint coating that walls off the metal from air and water to keep rust and corrosion in check. Hole spacing on the shank runs 2 in. (5 cm), giving 4 adjustable depth positions, two more than most competing ripper shanks, so the tooth can be set deep for root tearing or shallow for surface scarifying with the same bolt pattern. The shank is compatible with most ATV and UTV models, 2 in. receiver hitches and Cat. 0 and Cat. 1 tractor box blades, covering compact tractor builds up through small utility tractors. Hand assembly runs in three steps: install the shear bolt, fix the sharp tooth, then tighten down the connection, so the ripper is on the box blade and out in the dirt without a full wrench set. The package includes an extra replaceable plow tip and a mounting pin, plus two ripper teeth, two mounting hooks and the shear bolts that fail under sudden load to protect the hitch and the shank leg from cracking when the tooth catches a buried root. For property owners who keep one tractor working hard, this ripper shank is an affordable depth-adjustable upgrade.

This 2-in-1 dethatcher and scarifier tool can turn your lawn into a lush oasis with easily swappable detachable blades, which help remove thatch and dead plants for healthier grass. It has a 16 in. working width and a 15AMP motor, making it one of the widest and most powerful tools of its kind on the market, and its high-speed motor runs up to 3600rpm to handle even tough jobs with ease. The tool has two adjustable systems including 3-rod handle height adjustment and 5 raking height adjustments with the ripper blade suitable for grass up to 4cm tall and the grass blade for grass up to 7.5cm tall allowing you to customize it to your needs. Its 58 qt. collection box means no frequent emptying and it is detachable for easy dumping creating a smoother work experience. Designed with safety and convenience in mind it features tool-free quick-lock and folding for easy storage and a double safety switch to ensure safe use. Note that this is not a lawnmower but a tool specifically for removing thick layers of dead plants to boost lawn health.

Multiple tools in 1, the Brinly box scraper helps with landscapring to backfilling. The 42 in. extra-wide blade width means you'll move more material and cover more ground with every pass, while the steel tray provides the option of adding additional weight for tougher leveling projects. In addition to having the ability to perform all box scraper tasks, the side plates and scarifier bar can be easily removed to make a Rear Blade, which is ideal for grading, backfilling, or moving dirt, gravel, sand and snow. The heavy, center-mounted C-frame and durable carbon steel blade guarantee that this tool will last project after project, year after year. For versatility, the box blade angles and locks 30° in either direction for pushing instead of pulling.

Bring big-implement digging power to a compact tractor or sub-compact rig with this 5-piece 16 in. box blade shank set built from premium carbon steel under a powder-coated, rust-proof finish. Each shank measures 16 in. / 410 mm tall by 8 in. / 209 mm wide — a shorter footprint than 18 in. shanks that makes the assembly easier to maneuver on tight job sites and pairs better with smaller box scraper frames. Three adjustment holes per shank (1.5 in. / 40 mm spacing, 1/2 in. / 15 mm hole diameter) let homestead owners and weekend graders dial in light back-fill on a driveway, medium grading on a riding-arena, or deeper ripping in compacted pasture. The 2 included replaceable tapered teeth (4 in. tooth length, 2 in. tooth height) bite into clay, stony fields, and gravel grades without rolling, while the powder coating shrugs off rust through wet conditions and snowy winter storage. The 8/17 in. / 12 mm pin diameter snaps teeth in place for fast field-side swaps. A complete set of mounting fittings ships in the box and the shanks attach via 3-point holes to a tractor's box scraper frame. Whether you're leveling a private driveway, smoothing a homestead pasture, or back-filling around a new shop foundation, this compact 16 in. set keeps a smaller tractor earning its keep.

Refresh a working box scraper or land grader with this 4-piece 18 in. shank set built from premium carbon steel under a powder-coated, rust-proof finish — a lighter pack than the 5-piece option but enough hardware to bring most beat-up implements back to spec. Each shank measures 18 in. / 464 mm tall by 8 in. / 209 mm wide with 4 adjustable position holes (1.5 in. / 40 mm interval, 1/2 in. / 15 mm hole diameter), letting working farms and landscape contractors dial shallow scarifying on driveways or deep ripping in compacted pasture without swapping implements. Six replaceable tapered teeth (4 in. tooth length, 2 in. tooth height) ship with the kit, biting into stony fields, packed clay, and gravel grades without rolling over, while the powder coating fights corrosion through wet field work and salt-rich winter storage. The included pins (8/17 in. / 12 mm pin diameter) lock teeth in place quickly so a worn cutting edge swaps out in minutes, not hours. A complete set of mounting fittings ships in the box and the assembly attaches via 4-point holes to a tractor's 3-point hitch box blade frame. Whether you're prepping a feedlot, smoothing a driveway after a wet winter, or grading a pasture for reseeding, this 4-piece pack restores a worn box blade without buying a full new implement.

Stretch the working life of a box blade or land scraper with this 5-piece 18 in. shank set built from premium carbon steel under a powder-coated, rust-proof finish. Each shank measures 18 in. / 464 mm tall by 8 in. / 209 mm wide with 4 adjustable position holes pinned to the reinforced frame, letting Pro operators dial in shallow grading on driveway repair or deep ripping in compacted pasture without swapping implements. A 1.5 in. / 40 mm hole interval and 1/2 in. / 15 mm hole diameter line up with most standard box blade frames, and the included 7 replaceable tapered teeth (4 in. tooth length, 2 in. tooth height) deliver spares that survive a long working season without sourcing parts mid-project. Tapered teeth bite into hard clay, stony fields, and graded gravel surfaces without rolling over, while the powder coating fights rust through wet, salty winter storage and seasonal field work. The complete set of mounting fittings ships in the box, and the box blade attaches to the tractor via 4-point holes — exactly what landscapers, hobby farmers, and small-property owners need to refresh a beaten box scraper without buying a whole new attachment. Whether you're leveling a driveway after a wet winter, ripping compacted pasture before reseeding, or back-filling a foundation cut, this 5-piece shank assembly keeps the box blade earning its keep.

4 Holes Box Blade Shank.With a heavy-duty steel construction and powder-coated finishing, our box blade is a perfect tool for landscaping, land leveling, back-filling, grading, and more. With three-position adjustment holes, The box blade is held in place with pins for easy adjustment and removal.

4 Holes Box Blade Shank. With a heavy-duty steel construction and powder-coated finishing, our box blade is a perfect tool for landscaping, land leveling, back-filling, grading, and more. With four-position adjustment holes, The box blade is held in place with pins for easy adjustment and removal.

18.11 in. Hitch Mounted Ripper. The hitch-mounted ripper has multiple depth Settings, adjustable for different operating depths, adding two more holes than most similar products. The box scraper shank is equipped with a shear bolt to protect the hitch and shank. The box blade for the tractor is made of high carbon steel with high strength and resistance to deformation. The spray paint coating on its surface effectively prevents rust and corrosion. Complete accessories: 18.11 in. length adjustable shank, 2-ripper teeth, 2-mounting pins, shear bolts. In just three steps, the box blade shank teeth can be installed by hand.