Shop for channel cable protector end caps

Elasco cable ramps are constructed with a solid cast polyurethane base and lid that are connected by a reinforced fiberglass rod that won't rust or corrode. Our products hold up against natural and man-made elements and are compliant with safety requirements. With easy transportation and simple installation, our products can be configured to meet your needs. Backed by a lifetime warranty and offering premium material characteristics. We provide a basic solution to a basic problem. Whether it be pedestrian or vehicle traffic we help maneuver from 1 side of cables to the other side while keeping your cables absolutely safe. No matter the weight of your cargo, we will help you get to your destination in a safe and efficient manner. Glow Disclaimer: Glow is measured in milli-candela's. The human eye, when dark adapted which takes most humans between 15-minutes to 45-minutes, can see in the dark 3.7 milli-candela's. Under the correct circumstances of pure darkness, our glow material can be seen up to 40-hours when the human eye has been dark adapted. Ideally, when viewing the glow material, your eyes should be dark adapted which means one has not been in the Sun or other light source - this will keep one's eyes from adapting between dark and light. If your eyes adjust from light to dark or there is light pollution present, the material will not look as enhances until one's eyes re-adapt. Material: Plastic.

Keep cords, hoses, and floor cables protected in busy indoor and outdoor areas with this 1 channel cable protector ramp set. Each ramp measures 39.37 in L x 5.91 in W x 1.22 in H and features a 1.18 in W x 0.79 in H channel to help organize and shield cables from foot traffic and vehicle crossings. Built from heavy duty rubber, it is designed for long lasting use with water resistance and low temperature flexibility, and it is rated for up to 18000 lb per axle. The textured surface helps reduce slipping, while the black and yellow design improves visibility. Connect multiple pieces to extend coverage, and use the mounting holes to secure ramps in place for garages, gardens, residential areas, and other work or storage spaces.

Protect cords, hoses, and small lines from foot traffic and vehicle crossings with this 1-channel rubber cable protector ramp set. Each piece measures 40 in L x 6 in W x 1.2 in H and features a 1.1 in W x 0.8 in H channel to help keep cables organized and shielded from crushing and abrasion. The heavy-duty rubber and PVC construction supports up to 22046 lb, while the textured, slip-resistant surface helps tires and pedestrians pass with added stability. High-visibility black and yellow coloring improves noticeability in low-light areas. Modular ends allow multiple sections to connect for longer runs, making this 4-pack a practical solution for driveways, parking areas, warehouses, events, job sites, and other indoor or outdoor locations.

Improve channel calming and site safety in parking lots, driveways, garages, private roads, and commercial properties with a rugged rubber speed bump designed for industrial use. Built from durable recycled rubber, it helps slow vehicles while protecting pedestrians, vehicles, and property. Industrial strength & weather resistant: Heavy-duty recycled rubber construction for long-lasting outdoor performance in sun, rain, and cold. High load capacity: Engineered to withstand heavy vehicle channel (up to 25,000 lb), ideal for busy lots and service areas. High visibility, day or night: Reflective yellow/black surface helps alert drivers; textured non-slip top improves traction in wet conditions. Built-in cable protection: Dual cable protector channels organize and shield extension cords, hoses, and power cables while allowing water drainage. Modular channel hump design: Connect sections to customize the total length for your site layout and coverage needs. Fast, secure installation: Includes expansion screws for mounting on asphalt or concrete for a stable, low-shift ramp. Specs (per section): 72.05 x 11.81 x 1.97 in; 48.50 lb. Also available in other size variants (e.g., 39.96 x 12.4 x 5.51 in and 72.44 x 12.4 x 4.88 in) to match different roadway and driveway requirements. Material: Steel.

Improve channel calming and site safety in parking lots, driveways, garages, private roads, and commercial properties with a rugged rubber speed bump designed for industrial use. Built from durable recycled rubber, it helps slow vehicles while protecting pedestrians, vehicles, and property. Industrial strength & weather resistant: Heavy-duty recycled rubber construction for long-lasting outdoor performance in sun, rain, and cold. High load capacity: Engineered to withstand heavy vehicle channel (up to 25,000 lb), ideal for busy lots and service areas. High visibility, day or night: Reflective yellow/black surface helps alert drivers; textured non-slip top improves traction in wet conditions. Built-in cable protection: Dual cable protector channels organize and shield extension cords, hoses, and power cables while allowing water drainage. Modular channel hump design: Connect sections to customize the total length for your site layout and coverage needs. Fast, secure installation: Includes expansion screws for mounting on asphalt or concrete for a stable, low-shift ramp. Specs (per section): 72.05 x 11.81 x 1.97 in; 48.50 lb. Also available in other size variants (e.g., 39.96 x 12.4 x 5.51 in and 72.44 x 12.4 x 4.88 in) to match different roadway and driveway requirements. Material: Steel.

This 2-channel cable protector ramp helps organize and shield cords, cables, and hoses in high-traffic areas while improving crossing safety for pedestrians and vehicles. The ramp measures 36.14 in. L x 9.84 in. D x 1.69 in. H with two built-in channels to keep lines separated, and the flip-open top cover speeds up cable loading and removal during setup changes. Built with TPU and TPR construction and designed for heavy-duty use, it supports up to 22,000 lbs per axle and is suitable for indoor or outdoor environments such as warehouses, parking areas, events, and job sites. Material: Plastic.

Electrical cables exposed to vehicle and pedestrian traffic are vulnerable to serious damage, leading to costly repairs, unexpected downtime, and safety risks. Loose cables not only create trip hazards but can also pose dangerous shock threats on the jobsite. ShockShield Cable Protection Systems offer a reliable solution to safeguard temporary cable runs in high-traffic areas. With a modular design that adapts to any environment, ShockShield makes it easy to connect multiple units for customized protection. Reduce liability, eliminate downtime, and protect your investment with the trusted durability of ShockShield. Material: Plastic.

Protect cords and hoses in high traffic areas with this 5 channel cable protector ramp designed for vehicles and foot traffic. The 2.9 ft ramp measures 35 in long by 20 in wide and 2 in high and includes a hinged cover that opens for faster cable placement and removal. Five channels help organize multiple lines while keeping them protected from crushing and abrasion. The rubber base with PVC cover provides durable performance for indoor and outdoor use, and the textured surface helps improve traction for safer passage. A black and yellow color scheme increases visibility in low light areas, and the modular interlocking design lets you connect additional sections for longer runs. Ideal for driveways, parking areas, warehouses, schools, events, and job sites.

Electrical cables exposed to vehicle and pedestrian traffic are vulnerable to serious damage, leading to costly repairs, unexpected downtime, and safety risks. Loose cables not only create trip hazards but can also pose dangerous shock threats on the jobsite. ShockShield Cable Protection Systems offer a reliable solution to safeguard temporary cable runs in high-traffic areas. With a modular design that adapts to any environment, ShockShield makes it easy to connect multiple units for customized protection. Reduce liability, eliminate downtime, and protect your investment with the trusted durability of ShockShield. Material: Plastic.

Protect and enhance your Unistrut channels with these premium black square end caps, crafted from soft PVC material for safety. Designed for easy installation, simply fit them onto the 1-5/8 strut channel ends to provide a seamless and protective finish. This 10-pack ensures comprehensive coverage and durability, making it an essential addition to your channel maintenance toolkit.