Shop for dl series 2 speed horizontal pulling winch ratchet

Our heavy-duty hand winch is engineered for uncompromising performance, boasting a 32.8 ft. high-strength steel cable that combines exceptional durability with superior flexibility. With a maximum pulling force of 1200 lbs., this workhorse is built to go the distance. Crafted with rugged components and a precision-machined gear system, it delivers consistent, reliable power even under the most demanding conditions. At the heart of our hand crank winch lies two-way ratchet mechanism-A precision-engineered component that delivers unrivaled control over every pull and release. Configured with a 4 :1 single-speed gear ratio, this system strikes the perfect balance between power and maneuverability. Elevate your hauling efficiency with our hand crank winch. Its nearly 8 in. ergonomic handle, crafted for a non-slip, fatigue-free grip that keeps you in control, even during long pulls. Paired with a tough galvanized frame that shrugs off rust and wear, this winch is built to outlast the toughest jobs and harshest environments. Ours is simple to set up and a total breeze to use, making it your ultimate go-to for horizontal pulling, anywhere, anytime. Indoors, outdoors, on water or land-this rugged workhorse pairs perfectly with motorboats, trailers, and all-terrain vehicles, adapting seamlessly to every scenario. No complicated setup, no steep learning curves-just secure it, crank it, and watch it deliver the power and performance you need to get the job done right, every single time.

NEIKO presents the 02251A Heavy Duty Manual Come Along Cable Puller. This comealong manual winch is capable of pulling 2 thousand pounds. Convenient and portable enough to use in almost every situation, small enough to carry with 1 hand and light weight so you can fit it in your trunk. Pull large loads and vehicles of whatever you are stuck in. You can also use them for stretching fences, lifting objects, and lowering objects. Some more advanced uses are also pulling joints together, pulling frame of a new construction together during its raising, or straightening heavy panels while putting them in place. Works in the industrial and construction fields, on boats and ships. With its long hand operated ratchet lever winch gets all the leverage you need. Material: Steel.

Dutton-Lainson's 14725 is a 2-speed hand/manual/pulling/ratchet DL-Series winch. It is used for horizontal pulling applications. It features a 2,000 lb. capacity, a 9.5 in. Quick-Attach handle with an ergonomic handle grip and freewheel operation for easy line removal. The winch is constructed with a zinc plated TUFFPLATE finish. Patented reversible ratchet allows cranking of cable or strap onto winch drum in either direction. Dual drive shaft system allows Quick-Attach handle to easily change from high speed to low gear cranking from one side, requiring less effort for heavier loads. A clamp kit is included to install cable onto the winch drum. Note: This winch is built for horizontal pulling applications. For vertical lifting applications, order a brake winch, a worm gear winch or a StrongArm electric winch without a clutch lever. D-L pulling winches are not recommended for lifting applications. For lifting, use a D-L brake or worm gear winch. D-L winches are not to be used as hoists for lifting, supporting, or transporting people, or for loads over areas where people could be present.

Dutton-Lainson's 15103 is a hand/manual/pulling/ratchet DL-Series winch. It is used for horizontal pulling applications. It features a 1,110 lb. capacity, a 7 in. handle with an ergonomic handle grip and freewheel operation for easy line removal. The winch is constructed with a zinc plated TUFFPLATE finish. A clamp kit is included to install cable onto the winch drum. Note: This winch is built for horizontal pulling applications. For vertical lifting applications, order a brake winch, a worm gear winch or a StrongArm electric winch without a clutch lever. D-L pulling winches are not recommended for lifting applications. For lifting, use a D-L brake or worm gear winch. D-L winches are not to be used as hoists for lifting, supporting, or transporting people, or for loads over areas where people could be present.

Dutton-Lainson's 15303 is a hand/manual/pulling/ratchet DL-Series winch. It is used for horizontal pulling applications. It features a 1,400 lb. capacity, a 9.5 in. handle with an ergonomic handle grip and freewheel operation for easy line removal. The winch is constructed with a zinc plated TUFFPLATE finish. Patented reversible ratchet allows cranking of cable or strap onto winch drum in either direction. A clamp kit is included to install cable onto the winch drum. Note: This winch is built for horizontal pulling applications. For vertical lifting applications, order a brake winch, a worm gear winch or a StrongArm electric winch without a clutch lever. D-L pulling winches are not recommended for lifting applications. For lifting, use a D-L brake or worm gear winch. D-L winches are not to be used as hoists for lifting, supporting, or transporting people, or for loads over areas where people could be present.

Dutton-Lainson's 14125 is a hand/manual/pulling/ratchet DL-Series winch. It is used for horizontal pulling applications. It features a 600 lb. capacity, a 7 in. handle with an ergonomic handle grip and freewheel operation for easy line removal. The winch is constructed with a zinc plated TUFFPLATE finish. Note: This winch is built for horizontal pulling applications. For vertical lifting applications, order a brake winch, a worm gear winch or a StrongArm electric winch without a clutch lever. D-L pulling winches are not recommended for lifting applications. For lifting, use a D-L brake or worm gear winch. D-L winches are not to be used as hoists for lifting, supporting, or transporting people, or for loads over areas where people could be present.

Dutton-Lainson's DL3200A (15440) Winch is a 2-speed hand/manual/pulling/ratchet winch for horizontal pulling applications. It has a 3,200 lb. weight capacity and a 9.5 in. Quick-Attach ratcheting handle with an ergonomic handle grip. The DL3200A Winch features freewheel operation for easy line removal. The patented reversible ratchet allows cranking of cable or strap onto winch drum in either direction. Dual drive shaft system allows Quick-Attach handle to easily change from high speed to low gear cranking from one side, requiring less effort for heavier loads. A clamp kit is included to install the cable onto the winch drum. Other features include: 1-1/8 in. drum hub diameter, 17.3:1 gear ratio and a 3/8 in. x 30 ft. cable size and reel capacity. NOTE: This winch is built for horizontal pulling applications. Features a zinc plated TUFFPLATE finish. For vertical lifting applications, order a brake winch, a worm gear winch, or a StrongArm electric winch without a clutch lever. D-L pulling winches are not recommended for lifting applications. For lifting, use a D-L brake or worm gear winch. D-L winches are not to be used as hoists for lifting, supporting, or transporting people, or for loads over areas where people could be present.

Dutton-Lainson's 24874 StrongArm SA-Series 12V DC electric winch is used for horizontal pulling applications only. This high-torque 12V DC motor has circuit-breaker overload protection. StrongArm DC electric winches have a dynamic motor brake as well as an automatic mechanical friction brake to securely hold the load. This electric winch features a 3,000 lb. single-line load capacity and a 4,500 lb. double-line load capacity. Other features include: "power in", "power out", controlled freewheeling clutch, 50 ft. of 7/32 in. galvanized aircraft cable, pulley block with snap hook and an emergency crank handle in case of power loss. The clutch lever allows for smooth load control and easy cable removal. The winch is powered by your vehicle battery, using the included wiring harness (25 ft. of positive battery wire and 8' of ground wire). Electric switch and clutch controls are conveniently located on the same side for easy operation. Note: This winch is built for horizontal pulling applications. For vertical lifting applications, order a winch with no clutch lever installed (price is the same). This winch has a maximum run time of 4 minutes. See owner's manual for more details. All D-L StrongArm electric winches are built for multipurpose hauling and pulling operations. They are not to be used as hoists for lifting, supporting, or transporting people, or for handling loads over areas where people could be present.

Dutton-Lainson's 25505 StrongArm SA-Series 120V AC electric winch is used for horizontal pulling applications only. This 120V AC operation comes complete with a 10 ft., 3-wire grounded power cord and a built-in 3-position rocker switch. This electric winch features a 1,200 lb. load capacity. Other features include: "power in", "power out", controlled freewheeling clutch, 50 ft. of 7/32 in. galvanized aircraft cable, an automatic mechanical friction brake and an emergency crank handle in case of power loss. The clutch lever allows for smooth load control and easy cable removal. The winch is powered through a standard wall outlet using the installed power cord (10', 3-wire grounded) and built-in 3-position rocker switch. Electric switch and clutch controls are conveniently located on the same side for easy operation. Note: This winch is built for horizontal pulling applications. For vertical lifting applications, order a winch with no clutch lever installed (price is the same). This winch has a maximum run time of 3 minutes. See owner's manual for more details. All D-L StrongArm electric winches are built for multipurpose hauling and pulling operations. They are not to be used as hoists for lifting, supporting, or transporting people, or for handling loads over areas where people could be present.

Dutton-Lainson's DLX1500 Trailer Winch is a hand/manual/pulling/ratchet winch for horizontal pulling applications. The patented reversible ratchet allows cranking of cable or strap onto winch drum in either direction. It features a 1,500 lb. capacity, a 9.5 in. handle with an ergonomic handle grip and freewheel operation for easy line removal. This winch includes a heavy duty polyester 20 ft. strap with snap hook that is 2 in. wide. Patented reversible ratchet allows cranking of cable or strap onto winch drum in either direction. It is constructed with a powder coated textured charcoal gray finish on the base and a zinc plated TUFFPLATE finish on the reel and hardware. Note: This trailer winch is only for use with horizontal pulling applications. For vertical lifting applications, order a brake winch, a worm gear winch or a StrongArm electric winch without a clutch lever.