Shop for dock system hardware connector pin

Get the PermaFloat Dock System Hardware Connector Pin for use with your PermaFloat dock items (sold separately). The pin is designed to be used as a connector with 1-1/2 in. thick lumber (at least 6 ft. wide). Material: Metal.

Tommy Docks replacement L-pins for our products brackets. Quick release L-pins allow for quick and easy installation and removal of your Tommy Dock. L-pin locking attachment system connects two dock sections together creating an interlocking modular dock system. Greatly reduces dock installation and removal time. Material: Steel.

Designed to allow the dock to slide up and down with the water level. This product is to be used on the inside or outside face of your stringers to secure the dock into place using a 3 in. diameter pipe. Lake water level variances can be accommodated with assurance that dock integrity can be maintained. Material: Steel.

Philips Hue only allows for a single continuous lightstrip run. Litcessory products allow for several!This 6-pin to 6-pin connector, compatible with the Philips Hue Lightstrip system, allow for the conversion of any female 6-pin end to a male 6-pin end. Simply insert a pin connector into a female 6-pin end to convert it to a male end.This product is great for:- Converting the female end of an extension cable or lightstrip to a male endMADE FOR INDOOR DRY LOCATIONS ONLY.

The Perma Dock System Hardware Washer Plate is made from premium-quality metal for high durability. This washer plate offers compatibility with your PermaFloat dock system (sold separately). Use 2 washer plates with each angle to strengthen the dock and resist pulling bolts through.

The PermaFloat Dock System Male T-Connector bolts to the side of the dock where a finger or ramp may attach or where an outside male corner cannot be used. It is used to connect sections of the dock. Intended for use with 1-1/2 in. thick lumber. Material: Metal.

The Dock Edge plus Dock 2 Go Connector Kit includes all heavy-duty hot dipped galvanized mounting hardware required to securely attach Dock 2 Go modular dock sections together. Fasteners, lumber, floatation and anchorage sold separately to allow for consumer preferences or requirements. The kits includes 2 male connector hinge's, 2 female connector hinge's, 4 backer plate's, and 2 connector pins. All floating dock hardware is 1/4 in. Hot Dipped Galvanized Steel. Each has 9/16 in. hole punches on 3-1/2 in. centers except where indicated. Slot sizes are 9/16 in. x 1-5/8 in. except where indicated. All Male and Female Connectors have a 3/8 in. tab with a 7/8 in. hole to fit a 3/4 in. pin or bolt.

The PlayStar Premium Adjustable Dock Leg PS 1330 is the ultimate solution for hassle-free leveling for your Premium Dock, keeping you dry and ensuring stability in any water conditions. With 39 inches of total adjustment-17 inches from the top screw and 22 inches from the lower pin-this leg adapts effortlessly to varying water levels and terrains. Its strong yet lightweight aluminum construction offers exceptional durability without adding unnecessary bulk, making it easy to handle and install. Designed for versatility, the PS 1330 works seamlessly with the PlayStar Dock Wheel (PS 1334) for roll-in docks or with the PlayStar Foot Plate (PS 1332) for stationary setups. The leg includes braces and all necessary mounting hardware to attach securely to PlayStar Premium Dock system. This adjustable dock leg combines reliability, convenience, and performance, so you can spend less time on setup and more time enjoying the water. Material: Metal.

The PlayStar Premium Adjustable Dock Leg PS 1330 is the ultimate solution for hassle-free leveling for your Premium Dock, keeping you dry and ensuring stability in any water conditions. With 39 inches of total adjustment-17 inches from the top screw and 22 inches from the lower pin-this leg adapts effortlessly to varying water levels and terrains. Its strong yet lightweight aluminum construction offers exceptional durability without adding unnecessary bulk, making it easy to handle and install. Designed for versatility, the PS 1330 works seamlessly with the PlayStar Dock Wheel (PS 1334) for roll-in docks or with the PlayStar Foot Plate (PS 1332) for stationary setups. The leg includes braces and all necessary mounting hardware to attach securely to PlayStar Premium Dock system. This adjustable dock leg combines reliability, convenience, and performance, so you can spend less time on setup and more time enjoying the water. Material: Polyethylene.

This stationary connector hinge kit includes 2 heavy-duty connector hinges and 4 backer plates. Use for all dock and ramp connections. Hardware is 1/8 in. nominal hot dipped galvanized steel with 7/16 in. holes for 3/8 in. bolts. Kit includes all hardware, bolts not included.