Shop for gray diecast sliding door handle wood pull

This handle is a gray internal style latching patio door with handle. When the single piece latch and rocker actuator is installed into the door frame through an access hole, the rocker part of the latch rocks it up and down to engage the keeper. Handle body is diecast steel with a wood pull attached. Mounting holes are 3-1/2 inch on center. This style is often found on Acorn, Burval and Trimview doors as well as a variety of other sliding patio door manufacturers. Use Prime-Line part E 2041 for the replacement keeper. Original keeper is no longer available.

The Prime-Line C 1201 Sliding Patio Door Handle is a non-keyed slide door handle replacement. It is non-handed for use on left or right sliding patio doors. The clamping mechanism on the sliding door handle replacement features a unique extruded aluminum saw-tooth style clamp that engages automatically when the slide door handle is in the locked position, and the door is slid closed. This sliding glass door handle consists of an extruded aluminum inside pull and a diecast constructed outside pull, both in a black- painted finish. The inside pull of the Prime-Line door handle features a decorative wood grain strip and the outside pull sits flush inside the framework of the sliding door panel. The door handle hook has mounting holes 3 inch on center. The clamp style sliding door handle includes mounting hardware. A Phillips head screwdriver is required for installation. For further dimensional information, please see the line drawing.

The Prime-Line C 1202 Sliding Patio Door Handle is a non-keyed slide door handle replacement. It is non-handed for use on left or right sliding patio doors. The clamping mechanism on the sliding door handle replacement features a unique extruded aluminum saw-tooth style clamp that engages automatically when the slide door handle is in the locked position, and the door is slid closed. This sliding glass door handle consists of an extruded aluminum inside pull and a diecast constructed outside pull, both in a white- painted finish. The inside pull of the Prime-Line door handle features a decorative wood grain strip and the outside pull sits flush inside the framework of the sliding door panel. The door handle hook has mounting holes 3 inch on center. The clamp style sliding door handle includes mounting hardware. A Phillips head screwdriver is required for installation. Please refer to the line art drawing and compare with your original item before purchasing.

This is an upgrade from the typical clamp handles. The inside handle has a wood handle attached to a black bracket and has a height of 2 inch from the door frame. The outside handle is black diecast. The clamp latch has a clamp profile of 1/4 inch and a clamp projection of 1/2 inch in the locked position. The handle has 4-15/16 inch on center mounting holes. It is non-handed and can be used on right or left-handed doors. It is non-keyed. Order Prime-Line part E 2000 to key this unit. Minimum door width of 7/8 inch and maximum of 1 inch.

This sliding door handle set has an extruded aluminum inside pull with a wood grain feature strip and a black diecast outside pull. It features a standard reversible mortise mount handle set for left or right-handed mortise-locking doors. Easy to install with a few simple tools.

This sliding patio door handle set is designed as a direct replacement for broken or worn flush-mounted, hook style door handles. Constructed with a mix of durable diecast components and a natural wood inside pull, the set combines strength, style, and functionality. The exterior pull features a chrome finish, while the interior supports are finished in chrome for a modern look. The inside pull showcases a clear-finished wood handle, adding a touch of warmth to your sliding door. This non-handed handle set fits both left- and right-handed sliding doors and installs easily on doors 1 inch to 1-1/8 inch thick with 6-5/8 inch hole center spacing. It comes complete with four interchangeable hook lengths (3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch), and a 2-11/16 inch keeper that mounts to the jamb. All fasteners and installation instructions are included, making it a convenient replacement solution. For proper selection, confirm the style, lock type, and center-to-center hole measurements match your existing hardware.

This non-handed diecast black flush mount patio door handle with wood pull is a design that fits Croft Series 301 patio doors, and a variety of other manufacturers of 7/8 in. to 1-1/8 in. thick patio doors. It comes with a shim to accommodate the thinner 7/8 in. thick door. Mounting holes are 6-5/8 in. on center. The inside and outside handles are 7/8 in. wide and 7-1/4 in. tall. It comes with a keeper and has a 4 latch hook assortment to accommodate the needs of most doors.

The Prime-Line C 1000 Extruded Aluminum Patio Sliding Glass Door Handle is an internal locking, hook style handle set and is non-handed allowing it to be used on both left and right-handed patio sliding doors. This sliding glass door handle set features an automatic unlatching option designed to prevent accidental lockouts, and it is used to replace damaged or missing internal locking, hook-style handle sets on a majority of sliding glass doors. This glass sliding door handle set is constructed of mixed materials including wood and diecast components. The outside non-keyed locking pull and the inside support of the handle for sliding glass door are constructed of extruded aluminum and comes finished in a aluminum-painted color. The sliding glass door handle replacement is designed to fit 17/8 to 2-3/8 inch thick internally latching type doors using a 4-15/16 inch hole center spacing. Besides matching the style and type of locking mechanism, the other main specification to match is the measurement of the mounting hole centers, from center-2-center.

This sliding patio door handle set is constructed of mixed materials including wood and diecast components, and it is designed to fit 90% of all internally latching type doors using a 3-1/2 inch hole center spacing. The outside non-keyed locking pull and the inside support are constructed of diecast and come finished in a black painted color. The inside pull is made of natural wood and is finished in a smooth, clear finish. This handle set is an internal locking, hook style handle set and it is non-handed allowing it to be used on both left and right-handed patio sliding doors. This handle set features an automatic unlatching option designed to prevent accidental lockouts, and it is used to replace damaged or missing internal locking, hook style handle sets on sliding glass doors with 1 inch thick door frames. Installation instructions and all fasteners necessary for the installation of this handle set are included in packaging. Product Selection Tip: Besides matching the style and type of locking mechanism, the other main specification to match is the measurement of the mounting hole centers, from center-to-center.

These Prime Line Products are surface mounted, no mortising required, universal design. Die cast inside pull with hardwood handle. Hardwood pull handle with stained finish.