Shop for max push to connect brass slip tee

The 1/2 in. Tectite by Apollo Female Pipe Thread Slip Tee allows is used to connect copper and CPVC plumbing systems. The slip capability allows a section (up to 2 in.) of Copper or CPVC pipe to be cut out allowing for the easy installation of the fitting where rigid pipes do not allow movement. Simply insert the slip coupling on to the pipe and using the Tectite by Apollo demount clip (included) to slip the fitting back onto the other end of pipe completing the connection. The Tectite by Apollo Push-To-Connect Female Pipe Thread Slip Tee is the fastest, cleanest and simplest way to add a line to existing copper and CPVC pipe without the use of tools, solder, open flame or glue. Fitting removal and reuse is just as simple using a simple demount clip (included). After assembly, fitting may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems. Material: Brass.

The 1/2 in. Push-to-Connect Slip Tee allows up to 2 inches of pipe to be removed and repaired. Repair a broken/leaking section of copper or CPVC pipe without replacing the pipe, or use this fitting in retrofit/remodel applications where additional length is needed for the connection. Great for emergency repairs. QUICKFITTING's patented technologies offer a full range of high-quality plumbing fittings and valves that are quick and easy to install. Our push-on fittings are reusable, durable, permanent plumbing connections, and get the job done 90% faster than traditional methods, including soldering. Our quick connection technology provides a simpler, safer, and a more cost-effective solution for connecting Copper, PEX and CPVC piping in plumbing and heating applications. No open flames or sealants needed, just quickly clean and debur the end of the pipe, then push to connect the fitting. We raise the industry bar for push connect technology by continuing to develop and test our products to provide superior performance. Removal of our push fittings is effortless with our patented Slip Clip release tool. QuickFitting is a US-based company with a portfolio of over 100 patents and counting, and our products are backed by a 75-year warranty. Material: Brass.

SharkBite push-to-connect slip fittings are the fastest way to repair a burst pipe or leak on copper and CPVC pipe. The slip fitting allows up to 2 inches of damaged pipe to be removed and repaired. Simply insert the slip coupling onto the pipe and using the SharkBite demount clip, slip the fitting back onto the other end of the pipe, completing the connection. The slip coupling is a great item to have handy for emergency or freeze repairs. No soldering or glue is required. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty. Material: Brass.

The 3/4 in. Push-to-Connect Slip Tee allows up to 2 inches of pipe to be removed and repaired. Repair a broken/leaking section of copper or CPVC pipe without replacing the pipe, or use this fitting in retrofit/remodel applications where additional length is needed for the connection. Great for emergency repairs. QUICKFITTING's patented technologies offer a full range of high-quality plumbing fittings and valves that are quick and easy to install. Our push-on fittings are reusable, durable, permanent plumbing connections, and get the job done 90% faster than traditional methods, including soldering. Our quick connection technology provides a simpler, safer, and a more cost-effective solution for connecting Copper, PEX and CPVC piping in plumbing and heating applications. No open flames or sealants needed, just quickly clean and debur the end of the pipe, then push to connect the fitting. We raise the industry bar for push connect technology by continuing to develop and test our products to provide superior performance. Removal of our push fittings is effortless with our patented Slip Clip release tool. QuickFitting is a US-based company with a portfolio of over 100 patents and counting, and our products are backed by a 75-year warranty. Material: Brass.

SharkBite Max push-to-connect fittings are the fastest way to connect PEX, copper, CPVC, PE-RT or HDPE. A newly designed stainless steel collet retainer deliver additional strength and durability and provides a 250-psi pressure rating. SharkBite Max fittings do not require a PEX tube liner and a re-engineered body allows you to insert the pipe using less force and greater ease. No soldering, clamps, unions, glue or special tools required. After inserting the pipe, stainless steel teeth bite down and grip the pipe tightly while a specially formulated O-ring compresses around the pipe to create a watertight seal. The fitting can be rotated after installation for quick adjustments and removing the fitting is just as fast with a disconnect tool, allowing fittings to be changed or reused. Material: Brass.

SharkBite Max push-to-connect fittings are the fastest way to connect PEX, copper, CPVC, PE-RT or HDPE. A newly designed stainless steel collet retainer deliver additional strength and durability and provides a 250-psi pressure rating. SharkBite Max fittings do not require a PEX tube liner and a re-engineered body allows you to insert the pipe using less force and greater ease. No soldering, clamps, unions, glue or special tools required. After inserting the pipe, stainless steel teeth bite down and grip the pipe tightly while a specially formulated O-ring compresses around the pipe to create a watertight seal. The fitting can be rotated after installation for quick adjustments and removing the fitting is just as fast with a disconnect tool, allowing fittings to be changed or reused. Material: Brass.

SharkBite Max push-to-connect slip fittings are the fastest way to make repairs on copper or CPVC pipe. The slip fitting allows for the removal of only the damaged section of pipe (up to 2") without having to replace the whole pipe. SharkBite Max fittings feature a newly designed stainless-steel retainer that delivers additional strength and durability while providing a 400 PSI pressure rating. The re-engineered body allows you to insert the pipe using less effort, making repairs even easier. No soldering, clamps, unions, glue, or special tools are required for installation. The fitting can be rotated after installation for quick adjustments, and removing the fitting is just as fast with a disconnect tool, allowing fittings and valves to be changed or reused. (SharkBite push-to-connect fittings are the fastest when compared to other conventual plumbing methods. All other comparisons relate to first generation SharkBite push-to-connect products. Material: Brass.

SharkBite max push-to-connect fittings are the fastest way to connect PEX, copper, CPVC, pe-rt or HDPE. A newly designed stainless steel collet retainer delivers additional strength and durability and provides a 250 psi pressure rating. SharkBite max fittings do not require a PEX tube liner, and a re-engineered body allows you to insert the pipe using less force and greater ease. No soldering, clamps, unions, glue or special tools required. After inserting the pipe, stainless steel teeth bite down and grip the pipe tightly while a specially formulated O-ring compresses around the pipe to create a watertight seal. The fitting can be rotated after installation for quick adjustments and removing the fitting is just as fast with a disconnect tool, allowing fittings to be changed or reused. Material: Brass.

SharkBite Max push-to-connect fittings allow you make pipe connections with half the insertion effort while withstanding double the burst pressure. Featuring a newly designed stainless-steel retainer, SharkBite Max delivers additional strength and durability while providing a 400 PSI pressure rating. The re-engineered body allows you to insert the pipe using less effort and doesn't require a PEX tube liner. No soldering, clamps, unions, glue or special tools are required for installation. They are the fastest way to connect PEX, copper, CPVC, PE-RT and HDPE pipe. The fitting can be rotated after installation for quick adjustments and removing the fitting is just as fast with a disconnect tool, allowing fittings and valves to be changed or reused. (SharkBite push-to-connect fittings are the fastest when compared to other conventual plumbing methods. All other comparisons relate to first generation SharkBite push-to-connect products.). Material: Brass.

SharkBite Max push-to-connect slip fittings are the fastest way to make repairs on copper or CPVC pipe. The slip fitting allows for the removal of only the damaged section of pipe (up to 2") without having to replace the whole pipe. SharkBite Max fittings feature a newly designed stainless-steel retainer that delivers additional strength and durability while providing a 400 PSI pressure rating. The re-engineered body allows you to insert the pipe using less effort, making repairs even easier. No soldering, clamps, unions, glue, or special tools are required for installation. The fitting can be rotated after installation for quick adjustments, and removing the fitting is just as fast with a disconnect tool, allowing fittings and valves to be changed or reused. (SharkBite push-to-connect fittings are the fastest when compared to other conventual plumbing methods. All other comparisons relate to first generation SharkBite push-to-connect products. Material: Brass.