Shop for mini end cutting pliers

Tekton Mini End Cutting Pliers have induction hardened blades that cleanly snip 14-38 AWG soft metal wires like copper, aluminum, brass, and silver and neatly trim plastic parts and ties. Blades have a fine, shallow bevel at the face and are induction hardened to 60 - 63 AWG and produce a refined semi-flush cut. A recessed coil spring gently assists the opening action of the pliers, reducing hand fatigue and overall control. Wide profile handles create a larger contact area for fingertips to rest comfortably. Slim vinyl grips add a bit of cushion and a nonslip surface without being bulky. All Tekton mini pliers are made from a custom-engineered steel alloy with a high carbon content reaching 44 - 48 HRC in its final hardened state. The main faces of the head and upper handle get their final surface with an extra fine 320 grit polishing process. Instead of adding a thick lacquer coating that scratches or chips off over time, the surface is protected by an ultra thin layer of dry-to-touch oil that can be maintained and recoated throughout the life of the pliers.

CHANNELLOCK High Leverage End Cutting Pliers feature Xtreme Leverage Technology (XLT) which makes cutting easier than ever. By positioning the rivet closer to the cutting edge, considerably less force is required to cut than other high leverage designs. State-of-the-art laser heat treating offers a strong and consistent pattern across the cutting edge for increased strength and longevity. These pliers also offer a slimmer, lighter, and better-balanced design for maximum performance and accessibility. CHANNELLOCK End Cutting Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.

KNIPEX Tools is the world's largest manufacturer of professional pliers since 1882. KNIPEX Pliers, Cutters, Insulated Tools and other products have been the tools of choice for Professional Tradesmen and end users who are serious about their hand tools and demand industrial quality. KNIPEX Tools are made from start to finish utilizing the highest quality materials. Based in Germany, KNIPEX Tools are German engineered to produce a tool unmatched in the industry in terms of features, comfort, design and performance.

Great for removing nails. Heavy-duty tool for long life. Cutting edge hardness (approx. 60 HRC). Cutting capacity - up to 5/64" medium hard material. Special tool steel; forged, oil-hardened.

CHANNELLOCK High Leverage End Cutting Pliers feature Xtreme Leverage Technology (XLT) which makes cutting easier than ever. By positioning the rivet closer to the cutting edge, considerably less force is required to cut than other high leverage designs. State-of-the-art laser heat treating offers a strong and consistent pattern across the cutting edge for increased strength and longevity. These pliers also offer a slimmer, lighter, and better-balanced design for maximum performance and accessibility. CHANNELLOCK End Cutting Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.

KNIPEX Tools is the world's largest manufacturer of professional pliers since 1882. KNIPEX Pliers, Cutters, Insulated Tools and other products have been the tools of choice for Professional Tradesmen and end users who are serious about their hand tools and demand industrial quality. KNIPEX Tools are made from start to finish utilizing the highest quality materials. Based in Germany, KNIPEX Tools are German engineered to produce a tool unmatched in the industry in terms of features, comfort, design and performance.

Tekton 8 Inch End Cutting Pliers have knife-to-knife cutting jaws. Machining the blades to a 90-degree angle allows them to be strong yet sharp, producing a smooth, clean cut with minimal effort. They are comprised of two opposing blades that meet in the center, resulting in an extremely reliable cutting method, especially for harder wires. The blades are hardened to 58 - 64 HRC. The jaws overhang each side of the body creating the bypass clearance to cut off long nails or wires. The rivet is polished flush on both sides of the pliers, ensuring it won't be an obstacle. The round nose profile provides a rocking prying action that creates easy, controlled leverage for pulling out staples or nails. The handles have an extra-wide, gently rounded profile that creates a large, smooth contact surface. This spreads out the pressure against your hand so you can comfortably squeeze as hard as needed. Slim single-layer vinyl grips offer a smooth, nonslip surface that is easy to clean.

These End-Cutting pliers feature wide throat clearance for clean, even, close range cutting of wire or nails. The handles are extended for longer reach and increased leverage. Forged in the USA of forged steel for maximum durability.

The Klinge series is our premium line of cutting tools by Capri Tools. The Klinge 6 in. End Cutting Pliers are constructed entirely of premium Japanese forged high-carbon steel and underwent state of the art heat treating process. Combined with our expertly hardened high-carbon steel cutting edges, our plies stay sharp over time. 55 HRC cutting edge hardness achieves optimal balance between toughness and edge retention. Our cutters cuts through soft wires (4.0 mm), medium hard wires (2.8 mm) and hard wires (2.3 mm). Pull and cut nails or twist and cut wires in one easy action. A slim and compact profile makes these pliers lighter and more agile especially in tight spots. The Klinge 6-Inch End Cutting Pliers meet ASME B107.11 standards.

Tekton Mini Diagonal Cutting Pliers have induction hardened blades that cleanly snip 14-38 AWG soft metal wires like copper, aluminum, brass, and silver and neatly trim plastic parts and ties. Blades have a fine, shallow bevel at the face and are induction hardened to 60 - 63 AWG and produce a refined semi-flush cut. A recessed coil spring gently assists the opening action of the pliers, reducing hand fatigue and overall control. Wide profile handles create a larger contact area for fingertips to rest comfortably. Slim vinyl grips add a bit of cushion and a nonslip surface without being bulky. All Tekton mini pliers are made from a custom-engineered steel alloy with a high carbon content reaching 44 - 48 HRC in its final hardened state. The main faces of the head and upper handle get their final surface with an extra fine 320 grit polishing process. Instead of adding a thick lacquer coating that scratches or chips off over time, the surface is protected by an ultra thin layer of dry-to-touch oil that can be maintained and recoated throughout the life of the pliers.