Shop for round faceplate self sealing foam

The Thermwell Products Co., Inc. 1 in. x 3 ft. Fiberglass Self-Sealing Pre-Slit Pipe Cover features a pre-slit tube with a self-sealing jacket. This pipe cover fits 2 in. pipe and can be used where foam pipe insulation is not appropriate. Product length is 36 in.

This 2 -roll foam window sealing kit provides a total of 13 in. of high-quality foam strip, with each individual roll measuring 2 in. W x 1 in. T x 6.5 ft. L. Crafted from non-toxic, harmless materials, the foam tape boasts strong, long-lasting adhesion, along with excellent flame retardancy, heat insulation, and oil resistance properties. It will not peel or degum over extended use, and can perform consistently across a wide temperature range from -40°C to 96°C. Designed to fit and seal uneven gaps, irregular surfaces, and narrow openings, this weatherstrip effectively blocks cold and hot drafts while reducing unwanted ambient noise. It is suitable for use on windows, doors, AC units, HVAC systems, refrigerators, automobiles, RVs, and marine vessels. Installation is straightforward and requires no specialized tools: first measure the gap to cut the appropriate length of tape, clean the target surface thoroughly to remove dirt and debris, peel off the protective backing paper, then press the foam strip firmly to expel trapped air and ensure a secure, tight bond.

The use of plastic venting systems on gas fired water heaters, furnaces and boilers has undergone a significant change. CSA B149.1 Natural Gas and Propane Installation Code now requires all special venting material to be certified to ULC S636 across Canada. IPEX addressed this market need with System 636, a fully certified flue gas vent system. Since the inception of System 636, IPEX has made numerous product line additions and extensions to now offer the most complete product offering in the market. Also, System 636 is very professionally represented by IPEX with sales, technical, code issues and training support.

The Thermwell Products Co., Inc. 3 in. x 3 ft. Fiberglass Self-Sealing Pre-Slit Pipe Cover can be used where foam pipe insulation is not appropriate and fits 3 in. pipe. This pre-slit tube has a self-sealing jacket and can be used for steam heat systems and next to water heaters.

This is a mortise lock housing and hook are made of steel, with a round-end faceplate, and mounting holes that are 3-11/16 inch on center. It has a vertical keyway when the hook is fully extended. Each mortise lock is spring-loaded, with an adjustable hook projection. The adjustment screw is on the face of the lock. Typically used by Adams Rite and a variety of other manufacturers.

This high-resilience foam weatherstrip is designed to create reliable airtight seals and provide gentle cushioning for various items. Made with durable, flexible material, it can be cut to any custom length to fit gaps of different shapes and sizes, and compresses tightly to keep out drafts and unwanted noise. The kit comes with 4 rolls of foam tape, each measuring 1 in. wide and thick, with a total length of 26 in. for multiple uses. It works well for sealing uneven or narrow gaps around windows and doors, and can also be used on AC units, HVAC systems, fridges, RVs and marine equipment. Crafted from non-toxic materials, it features strong adhesion, flame retardancy, heat insulation and oil resistance, able to hold up in a wide temperature range. Applying the tape is straightforward: first measure the needed length, clean the application surface, cut the tape with scissors, peel off the protective backing, and press firmly to expel trapped air for a secure, long-lasting bond.

This is a stainless steel mortise lock designed for a 45 degree keyway. The hook is spring-loaded with an adjustable hook projection that extends to the locked position to automatically latch upon closing, and the adjustment screw is on the face of the lock for easy adjustment. Each lock has a round end faceplate that is designed to fit on most Adam Rite sliding doors.

When your sliding door mortise lock is broken or old, don't replace the door entirely, just get a new mortise lock! This Prime-Line E 2121 Mortise Lock has an adjustable, spring-loaded hook latch projection for surface-mounted sliding patio doors constructed of wood, aluminum and vinyl with handle sets with 45-degree angled keyway positions when in the locked position. It also fits doors using W&F manufactured handles. The mounting hole centers of this lock measures 3-11/16 inch from center to center, and the rear housing corners are square. Selection Tip: To ensure the perfect match is selected prior to purchasing, the lock will need to be removed to compare the following 4 features (besides the width of housing): 1) The distance of the mounting holes measured from center to center, 2) The faceplate ends; rounded or square, 3) The position of the slotted keyway when in the locked position; at 45-degree angle or vertical, and 4) The shape of the housing corners at the rear; square or slanted. Installation Tip: Watch the manufacturer's How-To Video that is linked to this item page.

When your sliding door mortise lock is broken or old, don't replace the door entirely, just get a new mortise lock! This Prime-Line E 2014 Mortise Lock has an adjustable, spring-loaded hook latch projection for surface-mounted sliding patio doors constructed of wood, aluminum and vinyl with handle sets with 45 degree angled keyway positions when in the locked position. It also fits doors using W&F manufactured handles. The mounting hole centers of this lock measures 3-11/16 inch from center to center, and the rear housing corners are square. Selection Tip: To ensure the perfect match is selected prior to purchasing, the lock will need to be removed to compare the following 4 features (besides the width of housing): 1) The distance of the mounting holes measured from center to center, 2) The faceplate ends; rounded or square, 3) The position of the slotted keyway when in the locked position; at 45 degree angle or vertical, and 4) The shape of the housing corners at the rear; square or slanted. Installation Tip: Watch the manufacturer's How-To Video that is linked to this item page.

This Prime-Line E 2164 Mortise Lock is constructed with a corrosion-resistant steel housing and steel faceplate. The mortise lock set features a round-end face plate that serves as an adjustment feature for the hook's distance of projection. The keyway of the replacement mortise lock rests at a 45 degree position when the hook is fully extended in the locked position. The mounting holes of the sliding door latch are spaced apart at 4-5/8 inch on center. The patio door latch fits on W and F manufactured handles. For all dimensional information please refer to the line art and compare to your needs before purchasing. This lock can be installed with a few simple tools, please be sure to watch the installation video below for tips.