Shop for thermostat non programmable hydronic fan switch 120

Experience precise and customizable temperature control with the Stelpro Non-Programmable Electronic Thermostat. Designed specifically for baseboards and convectors, this thermostat can regulate temperature accurately within a range of 41F to 86F and precise increments of ±1F ensuring your home remains comfortable at all times. Its safe, sealed design and clipped TRIAC switches offer durability and security, making it a reliable choice for any home. Ideal for various heating applications, this thermostat supports a wide wattage range, ensuring compatibility across different voltage requirements. Optimize your home's warmth and energy use with Stelpro's innovative thermostat technology.

DITRA-HEAT-E-R is a non-programmable digital thermostat used to control the DITRA-HEAT-E-HK heating cables (either 120-Volt or 240-Volt). The thermostat features a 5 mA built-in Ground Fault Circuit Interrupter (GFCI) with indicator light. DITRA-HEAT-E-R is operated via a simple on/off switch. Two heating cables may be connected to the thermostat, up to the total heating load limit of 15 Amp.

The Honeywell Home Digital Non-Programmable Thermostat offers electronic controls and a large digital display for simple control of your heating and cooling system. It has precise temperature control of +/- 1 degree Fahrenheit. It is easy to use, easy to see and has an easy-access battery compartment.

The HWP (hot water) Series Programmable thermostat was intended for use as a 2 circuit thermostat controlling a circuit pump and fan on a hydronic coil heating system, though it could be used when needing a 2 circuit control with 1-minute delay on the second circuit. This control solves the historic problem of using a standard 22 Amp bi-metal heating thermostat on a hydronic system which require high Amp loads to be accurate. Without a load they will not shut off properly, continuing to circulate hot water when not needed. This control positively controls both circuits creating energy savings and superior comfort control, while providing excellent hydronic control.

The EP3 Low voltage electronic programmable thermostat has voltage rating of 24 VAC/VDC and current rating of 1.0 Amp and can be programmed for 4 time periods per day to save energy. The EP3 Thermostat keeps track of actual operational time. It also allows for manual operation and offers a temperature of range 50 to 90°F. It has LCD display format with large front size. It measures 5-1/2 in. x 1-1/4 in. x 3-1/2 in. Thermostat has 3-position system switch and 2-position fan switch. It includes 2 AA batteries. It features separate base plate to aid installation.

The Honeywell Programmable Bath Fan Control can be installed in place of a normal switch to manually turn your bathroom fan on/off. The controller can be programmed to run at certain times for better energy efficiency. For your convenience, the control's backlit display shows the current time.

The Honeywell Home Round 3-Wire Thermostat has mechanical operation in a traditional circular housing. It offers indoor climate control. It is non-programmable, easy-to-use and a reliable thermostat.

The Honeywell Home Round Heat/Cool Thermostat offers time-tested, precise temperature control in a simple, mercury-free thermostat. It has non-programmable mechanical operation in a traditional circular housing.

The HW-FS (hot water) Series with Fan Only Switch is intended for use as a 2 circuit thermostat controlling a circuit pump and fan on a hydronic coil heating system, though it could be used when needing a 2 circuit control with 1 minute delay on the second circuit. This control solves the historic problem of using a standard 22 Amp bi-metal heating thermostat on a hydronic system which require high Amp loads to be accurate. Without a load they will not shut off properly, continuing to circulate hot water when not needed. This control positively controls both circuits creating energy savings and superior comfort control, while providing excellent hydronic control.The HW-FS includes a Fan Only switch, allowing for fan only cooling operation in the summer months.

The Amaze-Heater Plug-In Thermostat provides the convenience of setting any of the Amaze-Heater wall panel convection heaters to maintain the desired room temperature. The thermostat is also a great addition for any type or brand of indoor heater or indoor wall air-conditioner unit. It will allow you to set the desired temperature, conserve energy and save money. The thermostat is an analog dial system for simplicity allowing you to set the desired temperature in Fahrenheit or Celsius. Simply select heat or cool setting on the rear of the unit, set to the desired temperature on the front dial, plug into the wall outlet and then plug in your heating or cooling appliance it's that easy. The thermostat even includes an easy on and off switch on the front to turn both the thermostat and the appliance on or off.